Enterasys G3G170-24, Cli Reference Manual

Page: 280 / 679

clear port vlan
7-8 802.1Q VLAN Configuration
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
The PVID is used to classify untagged frames as they ingress into a given port.
Example
This example shows how to add ge.1.10 to the port VLAN list of VLAN 4 (PVID 4).
G3(su)->set vlan create 4
G3(su)->set port vlan ge.1.10 4 modify-egress
clear port vlan
Use this command to reset a port’s 802.1Q port VLAN ID (PVID) to the host VLAN ID 1.
Syntax
clear port vlan port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to reset ports
ge
.1.3 through 11 to a VLAN ID of 1 (Host VLAN):
G3(su)->clear port vlan ge.1.3-11
port ‐ string Specifies the port(s) for which to configure a VLAN identifier. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 4 ‐ 1.
pvid Specifies the VLAN ID of the VLAN to which port(s) will be added.
modify ‐ egress (Optional) Adds port(s) to VLAN ʹ s untagged egress list and removes them
from other untagged egress lists.
no ‐ modify ‐ egress (Optional) Does not prompt for or make egress list changes.
port ‐ string Specifies the port(s) to be reset to the host VLAN ID 1. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 4 ‐ 1.