Enterasys G3G170-24, Cli Reference Manual

Page: 668 / 679

set pwa maxrequest
20-66 Security Configuration
Defaults
If port ‐ string is not specified, quiet period will be set for all ports.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the PWA quiet period to 30 seconds for ports ge .1.5 ‐ 7:
G3(su)->set pwa quietperiod 30 ge.1.5-7
set pwa maxrequest
Use this command to set the maximum number of log on attempts allowed before transitioning
the PWA port to a held state.
Syntax
set pwa maxrequests requests [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, maximum requests will be set for all ports.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the PWA maximum requests to 3 for all ports:
G3(su)->set pwa maxrequests 3
set pwa portcontrol
This command enables or disables PWA authentication on select ports.
Syntax
set pwa portcontrol { enable | disable } [ port-string ]
Parameters
maxrequests Specifies the maximum number of log on attempts.
port ‐ string (Optional) Sets the maximum requests for specific port(s). For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 4 ‐ 1.
e nable | disable Enables or disables PWA on specified ports.