Enterasys G3G170-24, Cli Reference Manual

Page: 593 / 679

show ipv6 ospf interface
Enterasys G-Series CLI Reference 19-37
Examples
This example displays information about OSPFv3 routing interface VLAN 80.
G3(su)->router>show ipv6 ospf interface vlan 80
IPv6 Address FE80::211:88FF:FE56:5D8F
ifIndex 430
OSPF Admin Mode Enable
OSPF Area ID 0.0.0.20
Router Priority 1
Retransmit Interval 5
Hello Interval 10
Dead Interval 40
LSA Ack Interval 1
Iftransit Delay Interval 1
Authentication Type None
Metric Cost 10 (computed)
OSPF Mtu-ignore Disable
OSPF Interface Type broadcast
State designated-router
Designated Router 2.2.2.2
Backup Designated Router 0.0.0.0
Number of Link Events 2
This example displays information about tunnel interface 0. Table 19 ‐ 7 on page 19 ‐ 37 explains the
content of the output fields.
G3(su)->router#show ipv6 ospf interface tunnel 0
IPv6 Address FE80::5000:2
ifIndex 456
OSPF Admin Mode Enable
OSPF Area ID 0.0.0.0
Router Priority 1
Retransmit Interval 5
Hello Interval 10
Dead Interval 40
LSA Ack Interval 1
Iftransit Delay Interval 1
Authentication Type None
Metric Cost 1 (computed)
OSPF Mtu-ignore Disable
OSPF Interface Type point-to-point
State point-to-point
Designated Router 0.0.0.0
Backup Designated Router 0.0.0.0
Number of Link Events 1
Table 19 ‐ 7 provides an explanation of the command output.
Table 19-7 show ipv6 ospf interface Command Output Details
Output Field What It Displays...
IPv6 Address The IPv6 address of the interface.
ifIndex The interface index number associated with the interface.
OSPF Admin Mode Whether the admin mode is enabled or disabled.
OSPF Area ID The area ID associated with this interface.
Router Priority The router priority. The router priority determines which router is
the designated router.