Enterasys G3G170-24, Cli Reference Manual

Page: 620 / 679

clear eapol
20-18 Security Configuration
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Examples
This example shows how to enable EAPOL:
G3(su)->set eapol enable
This example shows how to enable EAPOL with forced authorized mode on port
ge
.1.1:
G3(su)->set eapol auth-mode forced-auth ge.1.1
clear eapol
Use this command to globally clear the EAPOL authentication mode, or to clear settings for one or
more ports.
Syntax
clear eapol [ auth-mode ] [ port-string ]
Parameters
Defaults
If auth ‐ mode is not specified, all EAPOL settings will be cleared.
If port ‐ string is not specified, settings will be cleared for all ports.
enable | disable Enables or disables EAPOL.
auth ‐ mode
auto |
forced ‐ auth |
forced ‐ unauth
Specifies the authentication mode as:
• auto ‐ Auto authorization mode. This is the default mode and will
forward frames according to the authentication state of the port. For
details on this mode, refer to Table 20 ‐ 2 .
• forced ‐ auth ‐ Forced authorized mode, which disables authentication
on the port.
• forced ‐ unauth ‐ Forced unauthorized mode, which filters and discards
all frames received on the port.
port ‐ string Specifies the port(s) on which to set EAPOL parameters. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 4 ‐ 1.
auth ‐ mode (Optional) Globally clears the EAPOL authentication mode.
port ‐ string Specifies the port(s) on which to clear EAPOL parameters. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 4 ‐ 1.