Enterasys G3G170-24, Cli Reference Manual

Page: 69 / 679

show logout
Enterasys G-Series CLI Reference 2-25
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the terminal length to 50:
G3(su)->set length 50
show logout
Use this command to display the time (in seconds) an idle console or Telnet CLI session will
remain connected before timing out.
Syntax
show logout
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ only.
Example
This example shows how to display the CLI logout setting:
G3(su)->show logout
Logout currently set to: 10 minutes.
set logout
Use this command to set the time (in minutes) an idle console or Telnet CLI session will remain
connected before timing out.
Syntax
set logout timeout
screenlength Sets the number of lines in the CLI display. Valid values are 0, which
disables the scrolling screen feature described in “ Displaying Scrolling
Screens ” on page 1 ‐ 9, and from 5 to 512.