DynaVox Series 5 User Manual Download

Page: 127 / 166

Series 5 v1.07 - User’s Guide

121

Part # 401125-A

Connecting to the Internet

Section 8: Email & Internet Access

The DynaVox Series 5 device enables you to establish a connection with the Internet. Once

you are connected, your Internet capabilities depend on the type of device you have.

If you have an open Series 5 device, you can use your Internet connection for:

•

Full Internet Access (available on open Series 5 devices only)

•

Remote Technical Support

If you have a dedicated Series 5 device, you can use your Internet connection for:

•

Remote Technical Support

Connecting to the Internet

This section offers step-by-step instructions for setting up an Internet connection for your
Series 5 device.

Note:

Before you can use your Series 5 device for any online activities, you must

acquire Internet service through a third-party vendor. DynaVox

Technologies does not provide Internet access.

Reference:

The

Searchable Help

on your device (or on CD) also includes step-

by-step instructions for establishing a dialup Internet connection. If

you will be using this type of Internet access, open the

Searchable

Help

and perform a keyword search on “establishing a dialup

Internet connection.”

Reference:

Your Series 5 device shipped with Microsoft Security Essentials

(MSE) software pre-loaded, set to protect your system from viruses.

For more information on MSE, launch

Mozilla Firefox

from the

Windows desktop, then select

Favorites > Get Anti-Virus

. This will

open a DynaVox Knowledge Base article on MSE.

Reference:

No virus protection method is foolproof. You should routinely back up

your important data to an external location. Step-by-step instructions

for backing up are available in the

Backing Up and Restoring

section of this

User’s Guide

Summary of Contents for Series 5







































































































































































Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands

DynaVox Series 5, User Manual

Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands