DynaVox Series 5 User Manual Download

Page: 49 / 166

Series 5 v1.07 - User’s Guide

Part # 401125-A

Vocabulary Selection

Phase 4: Criticize

Are you on the right track? Step back and take a critical look at the vocabulary lists that you

compiled. Look again at the page sets. Ask yourself the following questions:

Will the device user have all the essential vocabulary that he or she will need in high
priority situations?

[ ] Yes [ ] No

Will the device user have vocabulary for fun or friendly conversation during these
activities?

[ ] Yes [ ] No

Have you identified many opportunities to practice?

[ ] Yes [ ] No

You can now begin to add the new vocabulary to your page set. Please refer to

Creating a

New Page or Popup

in this

User’s Guide

to see step-by-step instructions for adding a new

page to your page set. Step-by-step instructions for using the Modify button to add vocabulary

to an existing page are available in the

Modifying a Button

section of this

User’s Guide

When you are done, experiment with the new vocabulary by using the Series 5 device to talk

about the priority activity. Can you say things that the device user will want or need to say?

What messages are you unable to create? What messages would be easier to find if the

vocabulary was in a different place?

Be sure to enter any additional vocabulary before giving the device to the person who will be

using it. And be sure to get as much input from the device user as possible regarding the

available vocabulary. Since the Series 5 device will be the individual’s voice, he or she should

be able to accept or reject messages, and to help choose wordings and symbols.

You should revisit this Plan for Success from time to time. As the device user’s skill level, daily

activities and interests change, his or her vocabulary should change as well.

Note:

If you are completing this worksheet as part of a group, take a few minutes

to share your lists of activities and vocabulary with each other. You may

discover a few additional ideas.

Summary of Contents for Series 5







































































































































































Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands

DynaVox Series 5, User Manual

Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands