DynaVox Series 5 User Manual Download

Page: 141 / 166

Series 5 v1.07 - User’s Guide

135

Part # 401125-A

What is a “User”?

Section 9: Backing Up & Restoring

This section of the

User’s Guide

describes what a

.user

file is, and how it enables you to

customize the Series 5 software to your own needs and specifications. This section also

provides instructions on backing up your custom information (pages, sounds, symbols, etc.),

as well as sharing that information with other Series 5 device users. Finally, this section

includes step-by-step instructions for upgrading your DynaVox Series 5 software over an

active Internet connection.

What is a “User”?

When you completed the User Setup Wizard in the

Creating a User

section of this

User’s

Guide

, you named and created a user for your Series 5 device (which is saved as a .

user

file).

This user is a set of files that includes your page set, vocabulary, symbols and settings, and
more.

There are certain user-specific elements, files and software settings in the DynaVox Series 5

software that enable you to customize the device. These files and settings are saved in the

.user file when the current user is backed up or saved. When you change the active user, the

current user’s files and settings are replaced by those of the user that you are opening.

The user-specific elements and settings in the DynaVox Series 5 software are listed below:

•

Selection method

•

Voice settings

•

Pages in the

Page Browser

•

Custom symbols

•

Email and text messaging settings

•

Rate enhancement information

•

IR commands

•

Files in the

User Files

folder

•

Custom sounds

•

Imported media files (digital pictures, video files, sounds, MP3 files)

Note:

You can create multiple users on one Series 5 device. This is especially

useful in situations where more than one person is using the same device

to communicate.

Summary of Contents for Series 5







































































































































































Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands

DynaVox Series 5, User Manual

Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands