DynaVox Series 5 User Manual Download

Page: 27 / 166

Series 5 v1.07 - User’s Guide

Part # 401125-A

Using the Zoom Feature

•

Zoom Amount %

- Set the initial magnification factor of the zoom. Slide the thumb to the

right to increase the initial zoom, or to the left to decrease the initial zoom.

•

Animate Zoom

- Select this check box to animate the zoom feature.

•

Continuous Scroll/Pan

- When this check box is selected, scrolling (or panning) in the

Zoom Toolbar will continue until you make another selection. When the check box is not

selected, scrolling (or panning) will only move the zoomed area a small amount and then

stop

The Zoom Toolbar

When the

Zoom Area

is set to

Entire Screen

, the Zoom Toolbar will appear whenever the

zoom is activated. The Zoom Toolbar provides controls that help you move around the

zoomed portion of the page, increase or decrease the zoom factor, or even cancel the zoom

and start over.

The Zoom Toolbar has several settings that you can modify from within the

Zoom Settings

menu.

•

Movement Controls

- Choose the controls displayed in the Zoom Toolbar:

•

Panning

- Increase zoom, decrease zoom, and arrows that will move the magnified

area in the

opposite

direction of the arrows.

•

Scrolling

- Increase zoom, decrease zoom, and arrows that will move the magnified

area in the

same

direction of the arrows.

•

Close Only

- Only the Close tool to exit the zoom will be shown. No increase/

decrease zoom factor or movement arrows will be shown.

•

Size

- Choose the thickness of the Zoom Toolbar (and the size of the tools).

•

Position

- Choose the position of the Zoom Toolbar. It can appear in any of the four

corners of the screen, or around the entire perimeter of the screen.

•

Toolbar Color

- Choose the color of the Zoom Toolbar.

•

Tool Color

- Choose the color of the tools within the Zoom Toolbar.

•

Active Tool Color

- Choose the color of the tool being selected within the Zoom Toolbar.

Zoom Toolbar, bottom left, with Pan Arrows

Zoom Toolbar, top right, with Scroll Arrows

Summary of Contents for Series 5







































































































































































Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands

DynaVox Series 5, User Manual

Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands