DynaVox Series 5 User Manual Download

Page: 16 / 166

Learning the Software Interface

DynaVox

Learning the Software Interface

The DynaVox Series 5 software provides special tools to help you maintain and customize

your device.This section describes the features and tools available in the title bar and in

software menus.

The Title Bar

The white bar that stretches across the top of the touch screen is the title bar. The title bar is

not part of the communication page. Instead, it contains the following tools for using the
DynaVox Series 5 software:

Title bar (open Series 5 device)

The title bar contains the following buttons:

•

Page Back/Page Forward

- These two buttons enable you to move backwards and

forwards through all of the communication pages that you have opened on your device.

•

Home Page

- This button will always return you to your designated Home Page. This

ensures that you will always be able to find your way back to a familiar place when you

explore the page set.

•

Undo

- Select this button to undo the action that was most recently performed in the

Message Window. The software supports multiple levels of undo, so you can reverse

many actions.

•

My Phrases

- This button gives you instant access to any frequently-used phrases that

you have saved in the

My Phrases

menu (some phrases may pre-programmed with your

page set).

Note:

The title bar for an open Series 5 device (shown below) contains three

buttons that are not available on the dedicated device (Minimize, Maximize

and Close).

Page Back

Page Forward

My Phrases

Describe

Minimize

Maximize

Close

Home Page

Undo

Main Menu

Modify

Summary of Contents for Series 5







































































































































































Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands

DynaVox Series 5, User Manual

Search results

Summary of Contents for Series 5

Reviews:

Related manuals for Series 5

Brands by name

Popular brands