Dell Force10 S4810P, Reference Manual

Page: 889 / 1637

mask
(OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords
longer-prefixes
to view all
routes with a common prefix.
list
prefix-list
(OPTIONAL) Enter the keyword
list
and the name of a configured
prefix list. For more information, refer to the show ip route list
command.
protocol
(OPTIONAL) Enter the name of a routing protocol (
bgp
,
isis
,
ospf
,
rip
) or the keywords connected or static.
NOTE:
bgp
,
isis
,
ospf
, and
rip
are E-Series-only options.
• If you enter
bgp
, you can include the BGP
as-number
(E-
Series only).
• If you enter
isis
, you can include the ISIS
routing-tag
(E-Series only)
• If you enter
ospf
, you can include the OSPF
process-id
.
process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID
must be displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain routing tag
must be displayed.
connected (OPTIONAL) Enter the keyword
connected
to view only the directly
connected routes.
all (OPTIONAL) Enter the keyword
all
to view both active and non-
active routes.
static (OPTIONAL) Enter the keyword
static
to view only routes
configured by the
ip route
command.
summary (OPTIONAL) Enter the keyword
summary
. For more information,
refer to the show ip route summary command.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.9.1.0 Introduced VRF on the E-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
889