manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 1469

The sFlow agent address is carried in a field in SFlow packets and is used by the collector to 
identify the sFlow agent.
IPv6 sFlow collectors and agents are supported on E-Series (ExaScale and TeraScale), C-
Series, and S-Series routers.
As part of the sFlow-MIB, if the SNMP request originates from a configured collector, FTOS 
returns the corresponding configured agent IP in the MIB requests. FTOS checks to ensure 
that two entries are not configured for the same collector IP with a different agent IP. Should 
that happen, FTOS generates the following error: 

%Error: Different agent-addr 

attempted for an existing collector

.

sflow enable (Global)

Enable sFlow globally.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

sflow enable

To disable sFlow, use the 

no sflow enable

 command.

Defaults

Disabled.

Command Modes

CONFIGURATION

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.2.1.0

Introduced S-Series Stacking.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.7.1.0

Introduced on the S-Series.

Version 7.6.1.0

Introduced on the C-Series.

Version 6.2.1.1

Introduced on the E-Series.

Usage 
Information

sFlow is disabled by default. In addition to this command, sFlow needs to be enable on 
individual interfaces where sFlow sampling is desired.

Related 
Commands

sflow enable (Interface)

 – enables sFlow on Interfaces.

1469

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands