Dell Force10 S4810P, Reference Manual

Page: 306 / 1637

If the route-map entry contains sets with the continue clause, set actions are performed first
then the continue clause jumps to the specified route map entry.
• If a set action occurs in the first route map entry and then the same set action occurs
with a different value in a subsequent route map entry, the last set of actions overrides
the previous set of actions with the same
set
command.
• If
set community additive
and
set as-path prepend
are configure, the
communities and AS numbers are prepended.
Related
Commands
set community — specifies a COMMUNITY attribute.
set as-path — configures a filter to modify the AS path.
description
Add a description to this route map.
C-Series, E-Series, S-Series, Z-Series
Syntax description { description }
To remove the description, use the
no description { description }
command.
Parameters
description
Enter a description to identify the route map (80 characters
maximum).
Defaults none
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
7.7.1.0 Introduced.
Related
Commands route-map – enables a route map.
match as-path
Configure a filter to match routes that have a certain AS number in their BGP path.
C-Series, E-Series, S-Series, Z-Series
Syntax match as-path as-path-name
To delete a match AS path filter, use the
no match as-path as-path-name
command.
Parameters
as-path-name
Enter the name of an established AS-PATH ACL, up to 140 characters.
Defaults Not configured.
306