Dell Force10 S4810P, Reference Manual

Page: 112 / 1637

debug cpu-traffic-stats
Enable the collection of computer processor unit (CPU) traffic statistics.
C-Series, E-Series, S-Series, Z-Series
Syntax debug cpu-traffic-stats
To disable the debugging, use the
no debug cpu-traffic-stats
command.
Defaults Disabled
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.2.1.1 Introduced on the E-Series.
Usage
Information This command enables (and disables) the collection of CPU traffic statistics from the time this
command is executed (not from system boot). However, excessive traffic received by a CPU
automatically triggers (turn on) the collection of CPU traffic statics.
The following message is an indication that collection of CPU traffic is automatically turned on.
To view the traffic statistics, use the
show cpu-traffic-stats
command.
If excessive traffic is received by the CPU, traffic will be rate controlled.
NOTE: This command must be enabled before the
show cpu-traffic-stats
command displays traffic statistics. Dell Force10 recommends disabling debugging (
no
debug cpu-traffic-stats
) after troubleshooting is complete.
Related
Commands show cpu-traffic-stats – displays the cpu traffic statistics.
debug ftpserver
View transactions during an FTP session when a user is logged into the FTP server.
C-Series, E-Series, S-Series, Z-Series
Syntax debug ftpserver
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
112