Dell Force10 S4810P, Reference Manual

Page: 236 / 1637

Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increase the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
clear counters ip access-group
Erase all counters maintained for access lists.
C-Series, E-Series, S-Series, Z-Series
Syntax clear counters ip access-group [ access-list-name ]
Parameters
access-list-name
(OPTIONAL) Enter the name of a configured access-list, up to 140
characters.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increase the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
ip access-group
Assign an IP access list (IP ACL) to an interface.
C-Series, E-Series, S-Series, Z-Series
Syntax ip access-group access-list-name {in | out} [implicit-permit]
[vlan vlan-id ]
To delete an IP access-group configuration, use the
no ip access-group access-
list-name {in | out} [implicit-permit] [vlan vlan-id ]
command.
Parameters
access-list-name
Enter the name of a configured access list, up to 140 characters.
in Enter the keyword
in
to apply the ACL to incoming traffic.
236