Dell Force10 S4810P, Reference Manual

Page: 68 / 1637

•
flash:
(internal Flash) or any sub-directory
•
slot0:
(external Flash) or any sub-directory (C-Series and
E-Series only)
Command Modes EXEC Privilege
Command History
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series Original command
change bootflash-image
Change boot flash image from which to boot.
C-Series, E-Series
Syntax change bootflash-image {cp | linecard linecard-slot | rp}
Parameters
cp Enter the keyword
cp
to change the bootflash image on the control
processor on the RPM.
linecard
linecard-
slot
Enter the keyword
linecard
followed by the slot number to change
the bootflash image on a specific line card. The C-Series range is 0-7.
The E-Series range is 0 to 13 on the E1200, 0 on 6 on the E600, and 0 to
5 on the E300.
rp Enter the keyword
rp
to change the bootflash image on the RPM.
Defaults Not configured
Command Modes EXEC Privilege
Command History
Version 7.5.1.0 Introduced on C-Series
E-Series Original command
Usage
Information A system message appears stating that the bootflash image has been changed. You must
reload the system before the system can switch to the new bootflash image.
68