Dell Force10 S4810P, Reference Manual

Page: 583 / 1637

---------------------------------------------------------------
--------
4| 0| IPv4Flow|
232| 0|Allowed
4| 0| IPv6Flow|
0| 0|Allowed
FTOS#
FTOS#test cam-usage service-policy input LauraMapTest linecard
2 port-set 1
Linecard|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM per
Port|Status
---------------------------------------------------------------
-------
2| 1| IPv4Flow|
232| 0|Allowed
2| 1| IPv6Flow|
0| 0|Allowed
FTOS#
Usage
Information
The following describes the
test cam-usage
command shown in the Example below.
Term Explanation
Stack-Unit Lists the stack unit or units that are checked. Entering
all
shows
the status for all stacks.
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are
checked. Entering
all
shows the status for linecards and port-pipes
in the chassis.
CAM Partition Shows the CAM profile of the CAM.
Available CAM Identifies the amount of CAM space remaining for that profile.
Estimated CAM per
Port Estimates the amount of CAM space the listed policy will require.
Status Indicates whether or not the policy will be allowed in the CAM.
Example (S-
Series)
FTOS#test cam-usage service-policy input LauraIn stack-unit all
Stack-Unit|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
---------
0| 0| IPv4Flow|
102| 0|Allowed
0| 1| IPv4Flow|
102| 0|Allowed
FTOS#
!
FTOS#test cam-usage service-policy input LauraIn stack-unit 0
port-set 1
Stack-Unit|Portpipe|CAM Partition|Available CAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
-----------
0| 1| IPv4Flow|
583