Dell Force10 S4810P, Reference Manual

Page: 545 / 1637

peer-group-name
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
route-map
map-
name
(OPTIONAL) Enter the keywords
route-map
followed by the name
of a configured route map.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
neighbor distribute-list
Distribute BGP information via an established prefix list.
E-Series
Syntax neighbor [ ipv6-address | peer-group-name ] distribute-list
prefix-list-name [in | out]
To delete a neighbor distribution list, use the
no neighbor [ ipv6-address | peer-
group-name ] distribute-list prefix-list-name [in | out]
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name Enter the name of the peer group.
prefix-list-name Enter the name of an established prefix list. If you do not configure
the prefix list, the default is
permit
(to allow all routes).
in Enter the keyword
in
to distribute only inbound traffic.
out Enter the keyword
out
to distribute only outbound traffic.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
Usage
Information Other BGP filtering commands include the
neighbor filter-list
and
neighbor
route-map
commands.
Related
Commands
• neighbor filter-list – assigns a AS-PATH list to a neighbor or peer group.
• neighbor route-map – assigns a route map to a neighbor or peer group.
545