Dell Force10 S4810P, Reference Manual

Page: 100 / 1637

Related
Commands reset – resets a card.
upgrade fpga-image
Upgrade the primary FPGA image.
C-Series
Syntax upgrade fpga-image {rpm { number | all}| linecard { number | all}
[system-fpga | link-fpga] | all} {booted | file-url }
Parameters
rpm number Enter the keyword
rpm
followed by the RPM slot number to upgrade
an RPM FPGA The range is 0 to 1.
linecard
number
Enter the keyword
linecard
followed by the line card slot number
to upgrade a linecard FPGA. The range is 0 to 7 on the C300 and 0 to 3
on the C150.
all Enter the keyword
all
to upgrade all RPM and linecard FPGAs.
Enter the keyword
all
after the keyword
rpm
to upgrade all FPGAs
on all RPMs.
Enter the keyword
all
after the keyword
linecard
to upgrade all
FPGAs on all linecards.
system-fpga (OPTIONAL) Enter the keywords
system-fpga
to upgrade only the
system FPGA on a fiber linecard.
NOTE: Contact Dell Force10 TAC before using this keyword.
link-fpga (OPTIONAL) Enter the keywords
link-fpga
to upgrade only the
link FPGA on a fiber linecard.
NOTE: Contact the Dell Force10 TAC before using this keyword.
booted Upgrade the FPGA image using the currently running FTOS image.
file-url
Enter the following location keywords and information to upgrade the
FPGA using an FTOS image other than the one currently running:
• To specify an FTOS image on the internal flash, enter
flash:// file-path/filename
.
• To specify an FTOS image on an FTP server, enter
ftp://
user:password@hostip/filepath
.
• To specify an FTOS image on the external flash on the
primary RPM, enter
slot0://file-path/filename
.
• To copy a file on a TFTP server, enter
tftp://hostip/
filepath/ filename
where hostip is either an IPv4
dotted decimal address or an IPv6 URI [x:x:x:x::x] format
address..
100