Dell Force10 S4810P, Reference Manual

Page: 509 / 1637

peer-group-name
Enter the name of the peer group.
maximum
Enter a number as the maximum number of prefixes allowed for this
BGP router. The range is 1 to 4294967295.
threshold
(OPTIONAL) Enter a number to be used as a percentage of the
maximum value. When the number of prefixes reaches this
percentage of the maximum value, the E-Series software sends a
message. The range is 1 to 100 percent. The default is 75.
warning-only (OPTIONAL) Enter the keywords
warning-only
to set the router to
send a log message when the maximum value is reached. If you do
not set this parameter, the router stops peering when the maximum
number of prefixes is reached.
Defaults
threshold
= 75
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information If you configure the
neighbor maximum-prefix
command and the neighbor receives
more prefixes than allowed by the
neighbor maximum-prefix
command configuration,
the neighbor goes down and the
show ip bgp summary
command displays (
prfxd
) in the
State/PfxRcd column for that neighbor. The neighbor remains down until you enter the
clear
ip bgp
command for the neighbor or the peer group to which the neighbor belongs or you
enter the
neighbor shutdown
and
neighbor no shutdown
commands.
Related
Commands show ip bgp summary – displays the current BGP configuration.
neighbor X:X:X::X password
Enable TCP MD5 Authentication for an IPv6 BGP peer session.
C-Series, E-Series
Syntax neighbor x:x:x::x password {7 <encrypt-pass>|<clear-pass>
To return to the default setting, use the
no neighbor x:x:x::x password
command.
Parameters
encrypt-pass
Enter the encrypted password.
clear-pass
Enter the clear text password.
Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0 Introduced
509