Dell Force10 S4810P, Reference Manual

Page: 714 / 1637

simply rely on GVRP for VLAN updates. But if the local bridge needs to know only how to reach a given VLAN,
then GVRP provides all necessary information.
• The VLAN topologies that GVRP learns are treated differently from VLANs that are statically configured. The
GVRP dynamic updates are not saved in NVRAM, while static updates are saved in NVRAM. When GVRP is
disabled, the system deletes all VLAN interfaces that were learned through GVRP and leaves unchanged all
VLANs that were manually configured.
clear gvrp statistics
Clear GVRP statistics on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear gvrp statistics interface interface
Parameters
interface
interface
Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands show gvrp statistics – displays the GVRP statistics.
714