Dell Force10 S4810P, Reference Manual

Page: 294 / 1637

Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the
monitor
option.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information
When you use the
log
option, the CP processor logs detail the packets that match. Depending
on how many packets match the log entry and at what rate, the CP may become busy as it has
to log these packets’ details.
NOTE: When ACL logging and byte counters are configured simultaneously, byte counters
may display an incorrect value. Configure packet counters with logging instead.
Related
Commands
permit – configures a MAC address filter to pass packets.
seq – configures a MAC address filter with a specified sequence number.
mac access-list extended
Name a new or existing extended MAC access control list (extended MAC ACL).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac access-list extended access-list-name [cpu-qos
To delete a MAC access list, use the
no mac access-list extended access-
list-name
command.
Parameters
access-list-name Enter a text string as the MAC access list name, up to 140 characters.
cpu-qos Enter the keywords
cpu-qos
to assign this ACL to control plane
traffic only (CoPP).
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.10.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information
The number of entries allowed per ACL is hardware-dependent. For detailed specifications on
entries allowed per ACL, refer to your line card documentation.
294