Dell Force10 S4810P, Reference Manual

Page: 1494 / 1637

Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information For this
snmp-server trap-source
command to be enabled, you must configure an IP
address on the interface and enable the interface configured as an SNMP trap source.
Related
Commands snmp-server community – sets the community string.
snmp-server user
Configure a new user to an SNMP group.
C-Series, E-Series, S-Series, Z-Series
Syntax snmp-server user name { group_name remote ip-address udp-port
port-number } [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-
password ] [priv des56 priv password ] [access access-list-name |
ipv6 access-list-name | access-list-name ipv6 access-list-name ]
To remove a user from the SNMP group, use the
no snmp-server user name
{ group_name remote ip-address udp-port port-number } [1 | 2c |
3] [encrypted] [auth {md5 | sha} auth-password ] [priv des56
priv password ] [access access-list-name | ipv6 access-list-name
| access-list-name ipv6 access-list-name ]
command.
Parameters
name
Enter the name of the user (not to exceed 20 characters), on the host
that connects to the agent.
group_name
Enter a text string (up to 20 characters long) as the name of the group.
The following groups are created for mapping to read/write
community/security-names (defaults):
•
v1v2creadu
— maps to a community with
ro
permissions.
•
1v2cwriteu
— maps to a community
rw
permissions.
remote
ip-
address
Enter the keywords
udp-port
followed by the user datagram
protocol (UDP) port number on the remote device. The range is 0 to
65535. The default is 162.
udp-port
port-
number
Enter the keywords
udp-port
followed by the UDP (User Datagram
Protocol) port number on the remote device. The range is 0 to 65535.
The default is 162.
1 | 2c | 3 (OPTIONAL) Enter the security model version number (
1
,
2c
, or
3
):
•
1
is the least secure version.
•
3
is the most secure of the security modes.
•
2c
allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.
The default is 1.
1494