Dell Force10 S4810P, Reference Manual

Page: 421 / 1637

Parameters
ipv4 unicast
(OPTIONAL) Enter the keywords
ipv4 unicast
to view
information only related to ipv4 unicast routes.
ip-address (OPTIONAL) Enter the IP address (in dotted decimal format) of the
BGP network to view information only on that network.
mask
(OPTIONAL) Enter the network mask (in slash prefix (/x) format) of the
BGP network address.
filter-list
as-path-
name
(OPTIONAL) Enter the keyword
filter-list
followed by the
name of a configured AS-PATH ACL.
regexp
regular-
expression
Enter a regular expression then use one or a combination of the
following characters to match:
•
.
= (period) any single character (including a white space).
•
*
= (asterisk) the sequences in a pattern (0 or more
sequences).
•
+
= (plus) the sequences in a pattern (1 or more sequences).
•
?
= (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v) prior
to entering the
?
regular expression.
•
[ ]
= (brackets) a range of single-character patterns.
•
( )
= (parenthesis) groups a series of pattern elements to a
single element.
•
{ }
= (braces) minimum and the maximum match count.
•
^
= (caret) the beginning of the input string. If you use the
caret at the beginning of a sequence or range, it matches on
everything BUT the characters specified.
•
$
= (dollar sign) the end of the output string.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the
show ip bgp flap
command shown in the Example below.
Field Description
Network Displays the network ID to which the route is flapping.
421