manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 609

clear ets counters

Clear all ETS TLV counters on an interface.

S4810

Syntax

clear ets counters port-type slot/port

Parameters

port-type

Enter the keywords 

port-type

 followed by the slot/port 

information.

Defaults

none

Command Modes

EXEC Privilege

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 8.3.16.0

Introduced on the MXL 10/40GbE Switch IO Module.

dcb-enable

Enable data center bridging.

S4810

Syntax

dcb enable

To disable DCB, use the 

no dcb enable

 command.

Defaults

none

Command Modes

CONFIGURATION

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 8.3.16.0

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

By default, iSCSI is enabled on the unit and flowcontrol is enabled on all of the interfaces or if 
link-level flow control is enabled on one or more interfaces. To enable DCB, do one of the 
following:

•

Apply the 

dcb-input policy

 command with the 

no pfc-mode

 command on to 

all the interfaces.

•

Disable flow-control on all of the interfaces.

Related 
Commands

dcb-policy input

 – applies the input policy with the PFC configuration to an ingress interface.

609

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands