manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 769

show interfaces

 – displays the interface configuration.

interface loopback

Configure a Loopback interface.

C-Series, E-Series, S-Series, Z-Series

Syntax

interface loopback 

number

To remove a loopback interface, use the 

no interface loopback 

number

 command.

Parameters

number

Enter a number as the interface number. The range is 0 to 16383.

Defaults

Not configured.

Command Modes

CONFIGURATION

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

Version 6.4.1.0

Introduced

Example

FTOS(conf)#interface loopback 1655

FTOS(conf-if-lo-1655)#

Related 
Commands

interface

 – configures a physical interface.

interface null

 – configures a Null interface.

interface port-channel

 – configures a port channel.

interface vlan

 – configures a VLAN.

interface ManagementEthernet

Configure the Management port on the system (either the Primary or Standby RPM).

C-Series, E-Series, S-Series, S4810, Z9000

Syntax

interface ManagementEthernet 

slot/port

Parameters

slot/port

Enter the keyword 

ManagementEthernet

 followed by slot 

number (0-1) and port number zero (0).

Defaults

Not configured.

Command Modes

CONFIGURATION

Command History

Version 8.3.11.1

Introduced on the Z9000.

769

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands