Dell Force10 S4810P, Reference Manual

Page: 954 / 1637

show ipv6 route
Displays the IPv6 routes.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ipv6 route [ ipv6-address prefix-length ] [hostname] [all]
[bgp as number ] [connected] [isis tag] [list prefix-list name ]
[ospf process-id ] [rip] [static] [summary]
Parameters
ipv6-address
prefix-length (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
hostname (OPTIONAL) View information for this IPv6 routes with Host Name.
all (OPTIONAL) View information for all IPv6 routes.
bgp (OPTIONAL) View information for all IPv6 BGP routes.
connected (OPTIONAL) View only the directly connected IPv6 routes.
isis (OPTIONAL) View information for all IPv6 IS-IS routes.
list (OPTIONAL) View the IPv6 prefix list.
ospf (OPTIONAL) View information for all IPv6 OSPF routes.
rip (OPTIONAL for E-Series only) View information for all IPv6 RIP routes.
static (OPTIONAL) View only routes configured by the
ipv6 route
command.
summary (OPTIONAL) View a brief list of the configured IPv6 routes.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information The following describes the
show ipv6 route
command shown in the Examples below.
954