manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 612

description

Enter a text description of the DCB policy (PFC input or ETS output).

S4810

Syntax

description 

text

To remove the text description, use the 

no description

 command.

Parameters

text

Enter the description of the output policy. The maximum is 32 
characters.

Defaults

none

Command Modes

•

DCB INPUT POLICY

•

DCB OUTPUT POLICY

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 8.3.16.0

Introduced on the MXL 10/40GbE Switch IO Module.

Related 
Commands

•

dcb-input

 – creates a DCB PFC input policy.

•

dcb-policy input

 – applies the output policy.

•

dcb-output

 – creates a DCBETS output policy.

•

dcb-policy output

 – applies the output policy.

ets mode on

Enable the ETS configuration so that scheduling and bandwidth allocation configured in an ETS output policy or received 

in a DCBX TLV from a peer can take effect on an interface.

S4810

Syntax

ets mode on

To remove the ETS configuration, use the 

no ets mode on

 command.

Defaults

ETS mode is on.

Command Modes

DCB OUTPUT POLICY

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 8.3.16.0

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

If you disable ETS in an output policy applied to an interface using the 

no ets mode on 

command, any previously configured QoS settings at the interface or global level take effect. If 
QoS settings are configured at the interface or global level and in an output policy map (the 

612

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands