Dell Force10 S4810P, Reference Manual

Page: 1047 / 1637

Field Description
NOTE: A portion of the MAC CAM is used for system operations;
therefore, adding the MAC FIB and MAC ACL is less than the
MAC CAM.
MAC FIB Entries Displays the amount and percentage of CAM available for MAC
addresses.
MAC ACL Entries Displays the amount and percentage of CAM available for MAC
ACLs.
Example
FTOS#show mac cam
Slot Type MAC CAM Size MAC FIB Entries MAC ACL Entries
0 E24PD 64K entries 48K (75%) 8K (25%)
2 E24PD2 128K entries 64K (50%) 32K (50%)
11 EX2YD 64K entries 16K (25%) 24K (75%)
Note: All CAM entries are per portpipe.
FTOS#
Related
Commands show mac-address-table – displays the current MAC address configuration.
show mac learning-limit
Display MAC address learning limits set for various interfaces.
C-Series, E-Series, Z-Series, S4810
Syntax show mac learning-limit [violate-action] [detail] [interface
interface [vlan vlan-id ]]
Parameters
violate-action (OPTIONALY) Enter the keywords
violate-action
to display the
MAC learning limit violation status.
detail (OPTIONAL) Enter the keyword
detail
to display the MAC learning
limit in detail.
interface
interface
(OPTIONAL) Enter the keyword
interface
with the following
keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For SONET interfaces, enter the keyword
sonet
followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the C-Series, the range
is 1 to 128. For the E-Series, the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
1047