manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 1592

stack-unit stack-group

Configure stacking group specified by ID.

S4810

Syntax

[no] stack-unit 

unit-id

 stack-group 

stack-group-id

Parameters

unit-id

Enter the stack unit ID.

stack-group-id

Enter the stack group ID. The range is 0 to 16.

[no]

Use 

no stack-unit unit-id stack-group stack-id 

to remove the current stack group configuration.

Command Modes

CONFIGURATION

Command History

Version 8.3.10.2

Introduced on the S4810.

Usage 
Information

WARNING: The following message displays to confirm the command: 

All non-

default configurations on the related member ports ports 
(<ports listed here>) will be removed. Do you want to 
continue (y/n)?

 If you enter “y”, all non-default configurations on any member 

ports of the current stack group is removed when the unit is rebooted.

vlan-stack access

Specify a Layer 2 port or port channel as an access port to the stackable VLAN network.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

vlan-stack access

To remove access port designation, use the 

no vlan-stack access

 command.

Defaults

Not configured.

Command Modes

INTERFACE

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.2.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the C-Series and S-Series.

E-Series original 
Command

1592

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands