manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 707

Fast Ethernet 
interface:

enter the keyword 

FastEthernet 

followed by the slot/port information

1-Gigabit 
Ethernet 
interface:

enter the keyword

GigabitEthernet 

followed by the slot/port information

Port Channel 
interface:

enter the keyword

port-channel 

followed by a number:

•

C-Series and S-Series Range: 1-128

•

E-Series Range: 1 to 255 for 

TeraScale and 1 to 512 for ExaScale

SONET interface:

enter the keyword 

sonet

 followed by the 

slot/port information

10-Gigabit 
Ethernet 
interface:

enter the keyword 

TenGigabitEthernet

 followed by the 

slot/port information

40-Gigabit 
Ethernet 
interface:

enter the keyword 

fortyGigE

 followed by 

the slot/port information

control-vlan 

vlan-

id

Enter the keyword 

control-vlan

 followed by the VLAN ID. Range: 

1 to 4094.

Defaults

none

Command Modes

CONFIGURATION (conf-frrp)

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.2.1.0

Introduced on the C-Series.

Version 7.4.1.0

Introduced.

Usage 
Information

This command causes the Ring Manager to take ownership of these two ports after the 
configuration is validated by the IFM. Ownership is relinquished for a port only when the 
interface does not play a part in any control VLAN, that is, the interface does not belong to any 
ring.

Related 
Commands

show frrp

 – displays the Resilient Ring Protocol configuration information.

707

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands