Dell Force10 S4810P, Reference Manual

Page: 978 / 1637

Version 6.3.1.0 Introduced.
Related
Commands
• distribute-list out – suppresses networks from being advertised in updates.
• redistribute – redistributes routes from one routing domain to another routing domain.
distribute-list out
Suppress network prefixes from being advertised in outbound updates.
E-Series, S4810
Syntax distribute-list prefix-list-name out [connected | bgp as number
| ospf process-id | rip | static]
To return to the default values, use the
no distribute-list prefix-list-name
out [bgp as number connected | ospf process-id | rip | static]
command.
Parameters
prefix-list-name
Specify the prefix list to filter prefixes in routing updates.
connected (OPTIONAL) Enter the keyword
connected
for directly connected
routing process.
ospf
process-id
(OPTIONAL) Enter the keyword
ospf
followed by the OSPF process-
ID number. The range is 1 to 65535.
bgp as number (OPTIONAL) Enter the BGP followed by the AS Number. The range is 1
to 65535.
rip (OPTIONAL) Enter the keyword
rip
for RIP routes.
static (OPTIONAL) Enter the keyword
static
for user-configured routing
process.
Defaults Not configured.
Command Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.5.1.0 Added IPv6 ISIS support.
Version 6.3.1.0 Introduced.
Usage
Information You can assign a name to a routing process so a prefix list IS applied to only the routes derived
from the specified routing process.
978