manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 981

graceful-restart interval

Set the graceful restart grace period, the time during that all graceful restart attempts are prevented.

E-Series, S4810

Syntax

graceful-restart interval 

minutes

To return to the default, use the 

no graceful-restart interval

 command.

Parameters

minutes

Enter the graceful-restart interval minutes. The range is 1 to 20 
minutes. The default is 5 minutes.

Defaults

5 minutes

Command Modes

ROUTER ISIS

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 8.3.1.0

Introduced on the E-Series.

graceful-restart restart-wait

Enable the graceful restart maximum wait time before a restarting peer comes up.

E-Series, S4810

Syntax

NOTE: Set the t3 timer to 

adjacency

 on the restarting router when implementing this 

command.

graceful-restart restart-wait 

seconds

To return to the default, use the 

no graceful-restart restart-wait

 command.

Parameters

seconds

Enter the graceful restart time in seconds. The range is 5 to 300 
seconds. The default is 30 seconds.

Defaults

30 seconds

Command Modes

ROUTER ISIS

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 8.3.1.0

Introduced on the E-Series.

Related 
Commands

graceful-restart t3

 – configures the overall wait time before graceful restart completes.

981

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands