Dell Force10 S4810P, Reference Manual

Page: 388 / 1637

• ROUTER BGP-address-family
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, ACL names were up to 16 characters long.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information Use the
ip as-path access-list
command in CONFIGURATION mode to enter AS-
PATH ACL mode and configure the AS-PATH filters to deny or permit BGP routes based on
information in their AS-PATH attribute.
Related
Commands ip as-path access-list – enter AS-PATH ACL mode and configure the AS-PATH filters.
neighbor graceful-restart
Enable graceful restart on a BGP neighbor.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor { ip-address | peer-group-name } graceful-restart
[restart-time seconds ] [stale-path-time seconds ] [role
receiver-only]
To return to the default, enter the
no bgp graceful-restart
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal format.
peer-group-name
Enter the name of the peer group to apply the filter to all routers in the
peer group.
restart-time
seconds
Enter the keyword
restart-time
followed by the maximum
number of seconds needed to restart and bring-up all the peers. The
range is 1 to 3600 seconds. The default is 120 seconds.
stale-path-time
seconds
Enter the keyword
stale-path-time
followed by the maximum
number of seconds to wait before restarting a peer’s stale paths. The
default is 360 seconds.
role receiver-only Enter the keyword
role receiver-only
to designate the local
router to support graceful restart as a receiver only.
Defaults as above
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
388