Dell Force10 S4810P, Reference Manual

Page: 644 / 1637

Usage
Information The unit numbers given are internal port numbers. For a cross reference of the internal and
user port numbers, refer to the
Z9000 Debugging and Diagnostics
chapter in the
FTOS
Configuration Guide for the Z9000 System
.
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S-Series, Z-Series
Syntax show hardware layer3 {acl | qos} stack-unit 0-7 port-set 0-1
Parameters
acl | qos Enter either the keyword
acl
or the keyword
qos
to select between
ACL or QoS data.
stack-unit 0-7 Enter the keywords
stack-unit
followed by a numeral from 0 to 7
to select a stack ID.
port-set
0-1
Enter the keyword port-set with a port-pipe number, 0 or 1.
NOTE: The S25 models of the S-Series have only port-pipe 0.
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.0 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated
stack member.
S-Series, Z-Series
Syntax show hardware stack-unit stack-unit {cpu data-plane statistics
[stack-port 0-52 ] | cpu i2c statistics | cpu party-bus
statistics | cpu sata-interface statistics | drops [unit number
[port 0-27 ]] | stack-port 0-52 | ti-monitor | unit 0-1
{counters | details | port-stats [detail] | register}}
Parameters
stack-unit
stack-
unit
{command-
option}
Enter the keywords
stack-unit
to select a particular stack
member and then enter one of the following command options to
display a collection of data based on the option entered. The Z9000
range is 0 to 7.
cpu data-plane
statistics Enter the keywords
cpu data-plane statistics
, optionally
followed by the keywords
stack port
and its number, 0 to 52, to
display the data plane statistics, which shows the High Gig (
Higig
)
644