Dell Force10 S4810P, Reference Manual

Page: 530 / 1637

•
?
= (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v) prior
to entering the ? regular expression.
•
[ ]
= (brackets) a range of single-character patterns.
•
^
= (caret) the beginning of the input string. If you use the
caret at the beginning of a sequence or range, it matches on
everything BUT the characters specified.
•
$
= (dollar sign) the end of the output string.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are announced from
the same neighbor AS but with a different AS-Path.
C-Series, E-Series
Syntax show ip bgp ipv6 unicast inconsistent-as
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
C-Series, E-Series
Syntax show ip bgp ipv6 unicast neighbors [ ipv6-address prefix-length
| ip-address ] [advertised-routes | dampened-routes | detail |
flap-statistics | routes]
Parameters
ipv6-address
prefix-length | ip-
address
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
530