Dell Force10 S4810P, Reference Manual

Page: 158 / 1637

show linecard
Display the line card(s) status.
C-Series, E-Series
Syntax show linecard [ number [brief] | all]
Parameters
number (OPTIONAL) Enter a slot number to view information on the line card
in that slot. For the C-Series, the range is 0 to 7. For the E-Series, the
ange is 0 to 13 on the E1200, 0 to 6 on the E600, and 0 to 5 on the E300.
all (OPTIONAL) Enter the keyword
all
to view a table with information
on all present line cards
brief (OPTIONAL) Enter the keyword
brief
to view an abbreviated list of
line card information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
show linecard
output
Field
Description
Line card Displays the line card slot number (only listed in the
show
linecard all
command output).
Status Displays the line card’s status.
Next Boot Displays whether the line card is to be brought online at the next
system reload.
Required Type Displays the line card type configured for the slot. The Required Type
and Current Type must match. If they do not match, use the
linecard
command to reconfigure the line card type.
Current Type Displays the line card type installed in the slot. The Required Type
and Current Type must match. If they do not match, use the
linecard
command to reconfigure the line card type.
Hardware Rev Displays the chip set revision.
Num Ports Displays the number of ports in the line card.
Up Time Displays the number of hours and minutes the card is online.
FTOS Version Displays the operating software version.
158