Dell Force10 S4810P, Reference Manual

Page: 1079 / 1637

priority-tagged
number
Enter the keywords
priority-tagged
followed the Layer 2
priority. The range is 0 to 7.
Defaults Unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series and E-Series.
Related
Commands
protocol lldp (Configuration) – enables LLDP globally.
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med guest-voice-signaling
Configure the system to advertise a separate limited voice service for a guest user when the guest voice control packets
use a separate network policy than the voice data.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax advertise med guest-voice-signaling { vlan-id layer2_priority
DSCP_value } | {priority-tagged number }
To return to the default, use the
no advertise med guest-voice-signaling
{ vlan-id layer2_priority DSCP_value } | {priority-tagged number }
command.
Parameters
vlan-id Enter the VLAN ID. The range is 1 to 4094.
layer2_priority Enter the Layer 2 priority. The range is 0 to 7.
DSCP_value Enter the DSCP value. The range is 0 to 63.
priority-tagged
number
Enter the keywords
priority-tagged
followed the Layer 2
priority. The range is 0 to 7.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series and E-Series.
1079