Dell Force10 S4810P, Reference Manual

Page: 1229 / 1637

show crypto ipsec sa ipv6
Display the IPsec security associations (SAs) used on OSPFv3 interfaces.
E-Series TeraScale, Z-Series, S4810
Syntax show crypto ipsec sa ipv6 [ interface interface ]
Parameters
interface
interface
(OPTIONAL) Displays information about the SAs used on a specified
OSPFv3 interface, where
interface
is one of the following values:
• For a 1-Gigabit Ethernet interface, enter GigabitEthernet
slot
/
port
.
• For a Port Channel interface, enter port-channel number .
Valid port-channel numbers (on an E-Series TeraScale): 1 to
255.
• For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet
slot
/
port
.
• For a 40–Gigabit Ethernet interface, enter fortyGigE
slot
/
port
.
• For a VLAN interface, enter vlan vlan-id . Valid VLAN IDs: 1 to
4094.
Defaults No default behavior or values.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.1.(0.0) Introduced on the S4810 and Z9000.
Version 8.4.2.0 Introduced on the E-Series TeraScale.
Usage
Information
The show crypto ipsec sa ipv6 command output displays security associations set up for
OSPFv3 links in IPsec authentication and encryption policies on the router.
Related
Commands
show crypto
ipsec policy Display the configuration of IPsec authentication and encryption
policies.
Example
FTOS#show crypto ipsec policy
FTOS#show crypto ipsec sa ipv6
Interface: TenGigabitEthernet 0/0
Link Local address: fe80::201:e8ff:fe40:4d10
IPSecv6 policy name: OSPFv3-1-500
inbound ah sas
spi : 500 (0x1f4)
transform : ah-md5-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
1229