Dell Force10 S4810P Reference Manual Download Page 218

Page: 218 / 1637

debug dot1x

Display 802.1X debugging information.

C-Series, E-Series, S-Series, S4810

Syntax

debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu]
[interface

interface

]

Parameters

all

Enable all 802.1X debug messages.

auth-pae-fsm

Enable authentication PAE FSM debug messages.

backend-fsm

Enable backend FSM debug messages.

eapol-pdu

Enable the EAPOL frame trace and related debug messages.

interface

Restricts the debugging information to an interface.

Defaults

Disabled

Command Modes

EXEC Privilege

Command History

Version 8.3.12.0

Introduced on the S4810.

Version 8.4.1.0

Introduced on the C-Series and S-Series.

dot1x auth-fail-vlan

Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.

C-Series, E-Series, S-Series, S4810

Syntax

dot1x auth-fail-vlan

vlan-id

[max-attempts

number

]

To delete the authentication failure VLAN, use the

no dot1x auth-fail-vlan

vlan-

[max-attempts

number

]

command.

Parameters

vlan-id

Enter the VLAN Identifier. The range is 1 to 4094.

max-attempts

number

(OPTIONAL) Enter the keywords

max-attempts

followed number

of attempts desired before authentication fails. The range is 1 to 5.
The default is 3.

Defaults

3 attempts

Command Modes

CONFIGURATION (

conf-if-interface-slot/port

)

Command History

Version 8.3.12.0

Introduced on the S4810.

218

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 S4810P

Reviews:

Brands by name

Popular brands

Dell Force10 S4810P, Reference Manual

Search results

Summary of Contents for Force10 S4810P

Reviews:

Brands by name

Popular brands