Dell Force10 S4810P, Reference Manual

Page: 98 / 1637

upgrade fpga-image
You can use this command can only on systems with SFM3 modules (and only when required by the upgrade procedure
in the release notes). Upgrade the FPGA version in the specified E-Series SFM3 and automatically initiate an automatic
reset to complete the version upgrade.
E-Series, Z-Series
Syntax upgrade fpga-image {sfm} {all | id } [booted | flash:// | ftp: |
slot0: | tftp] file-url
Parameters
sfm Enter the keyword
sfm
to upgrade the FPGA on the SFMs.
all Enter the keyword
all
to upgrade the FPGA on all the SFMs.
id Enter the keyword
id
to upgrade the FPGA on all a specific SFM.
booted Enter the path to the upgrade source. Entering <CR> updates the
FPGA from the flash.
file-url
Enter the following location keywords and information to upgrade the
FPGA using an FTOS image other than the one currently running:
• To specify an FTOS image on the internal flash, enter
flash:// file-path/filename
.
• To specify an FTOS image on an FTP server, enter
ftp://
user:password@hostip/filepath
.
• To specify an FTOS image on the external flash on the
primary RPM, enter
slot0://file-path/filename
.
• To copy a file on a TFTP server, enter
tftp://hostip/
filepath/ filename
where hostip is either an IPv4
dotted decimal address or an IPv6 URI [x:x:x:x::x] format
address..
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0.0.0 Introduced on the Z-Series.
Version 8.3.1.0 Added the
rpm
option.
Version 7.5.1.0 Introduced on the C-Series.
Example
FTOS#upgrade sfm 1 autoreset
SFM1: upgrade in progress
!!! !!! !!!
SFM1: upgrade complete
SFM1 is active. Resetting it might temporarily impact traffic.
Proceed with reset [confirm yes/no]: yes
FTOS#
Usage
Information Reset the card using the
power-cycle
option after restoring the FPGA command.
98