Dell Force10 S4810P, Reference Manual

Page: 654 / 1637

Usage
Information Entering <CR> after the
clear ip dhcp binding
command clears all the IPs from the
binding table.
debug ip dhcp server
Display FTOS debugging messages for DHCP.
C-Series, S-Series, Z-Series
Syntax debug ip dhcp server [events | packets]
Parameters
events Enter the keyword
events
to display the DHCP state changes.
packet Enter the keyword
packet
to display packet transmission/reception.
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
default-router
Assign a default gateway to clients based on the address pool.
C-Series, S-Series, Z-Series, S4810
Syntax default-router address [ address2...address8 ]
Parameters
address
Enter a list of routers that may be the default gateway for clients on
the subnet. You may specify up to eight routers. List them in order of
preference.
Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
654