Dell Force10 S4810P, Reference Manual

Page: 665 / 1637

ip dhcp snooping binding
Create a static entry in the DHCP binding table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax [no] ip dhcp snooping binding mac address vlan-id vlan-id ip
ip-address interface type slot/port lease number
Parameters
mac
address
Enter the keyword
mac
followed by the MAC address of the host to
which the server is leasing the IP address.
vlan-id
vlan-id
Enter the keywords
vlan-id
followed by the VLAN to which the
host belongs. The range is 2 to 4094.
ip
ip-address
Enter the keyword
ip
followed by the IP address that the server is
leasing.
interface
type
Enter the keyword
interface
followed by the type of interface to
which the host is connected:
• For an 10/100 Ethernet interface, enter the keyword
fastethernet
.
• For a Gigabit Ethernet interface, enter the keyword
gigabitethernet
.
• For a SONET interface, enter the keyword
sonet
.
• For a Ten Gigabit Ethernet interface, enter the keyword
tengigabitethernet
.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
.
slot/port
Enter the slot and port number of the interface.
lease
time
Enter the keyword
lease
followed by the amount of time the IP
address will be leased. The range is 1 to 4294967295.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands show ip dhcp snooping – displays the contents of the DHCP binding table.
665