Dell Force10 S4810P, Reference Manual

Page: 1038 / 1637

• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. The E-Series range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
vlan
vlan-id
(OPTIONAL) Enter the keyword
vlan
followed by the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
pre-Version
6.2.1.1 Introduced on the E-Series.
show cam maccheck linecard
Display the results of the BCMI2 check command.
C-Series
Syntax show cam maccheck linecard slot port-set port-pipe
Parameters
linecard
slot
(REQUIRED) Enter the keyword
linecard
followed by a slot number
to select the linecard for which to gather information. The C300 range
is 0 to 7 and the C150 range is 0 to 4.
port-set port-pipe (REQUIRED) Enter the keywords
port-set
followed by a Port-Pipe
number to select the Port-Pipe for which to gather information. The
range is 0 or 1.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.6.1.0 Introduced on the C-Series.
Usage
Information
Use this command to check various flags associated with each MAC address in the CAM.
The Example below shows information for two MAC addresses. The second entry is for MAC
address 00:00:a0:00:00:00 (leading 0s are not shown), which is shown as learned on VLAN ID
1038