Dell Force10 S4810P, Reference Manual

Page: 1619 / 1637

pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information
To guarantee that a VRRP group becomes MASTER, configure the VRRP group’s virtual
address with same IP address as the interface’s primary IP address and change the priority of
the VRRP group to 255.
If you set the
priority
command to 255 and the
virtual-address
is not equal to the
interface’s primary IP address, an error message appears.
show config
View the non-default VRRP configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show config [verbose]
Parameters
verbose (OPTIONAL) Enter the keyword
verbose
to view all VRRP group
configuration information, including defaults.
Command Modes VRRP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Example
FTOS(conf-if-vrid-4)#show con
vrrp-group 4
virtual-address 119.192.182.124
!
show vrrp
View the VRRP groups that are active. If no VRRP groups are active, the FTOS returns
No Active VRRP group
.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show vrrp [ vrrp-id ] [ interface ] [brief]
Parameters
vrrp-id
(OPTIONAL) Enter the Virtual Router Identifier for the VRRP group to
view only that group. The range is 1 to 255.
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
1619