Dell Force10 S4810P, Reference Manual

Page: 1404 / 1637

Parameters
system Enter the keyword
system
to send accounting information of any
other AAA configuration.
exec Enter the keyword
exec
to send accounting information when a user
has logged in to EXEC mode.
commands
level
Enter the keyword
command
followed by a privilege level for
accounting of commands executed at that privilege level.
name | default Enter one of the following:
• For
name
, enter a user-defined name of a list of accounting
methods.
• For
default
, the default accounting methods is used.
start-stop Enter the keywords
start-stop
to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords
wait-start
to ensure that the
security server acknowledges the start notice before granting the
user’s process request.
stop-only Enter the keywords
stop-only
to instruct the security
server to send a “stop record accounting” notice at the end of the
requested user process.
Enter the keyword to use data for accounting.
FTOS currently only supports accounting.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
Usage
Information
In the example above, accounting is used to track all usage of EXEC command and
commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for example, use
the
aaa accounting command 1
command.
Example
FTOS(conf)# aaa accounting exec default start-stop
FTOS(conf)# aaa accounting command 15 default start-stop tacacs
+
FTOS(config)#
Related
Commands
enable password – changes the password for the
enable
command.
1404