Dell Force10 S4810P, Reference Manual

Page: 1560 / 1637

debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
To disable debugging of NTP transactions, use the
no debug ntp {adjust | all |
authentication | events | loopfilter | packets | select | sync}
command.
Parameters
adjust Enter the keyword
adjust
to display information on NTP clock
adjustments.
all Enter the keyword
all
to display information on all NTP transactions.
authentication Enter the keyword
authentication
to display information on NTP
authentication transactions.
events Enter the keyword
events
to display information on NTP events.
loopfilter Enter the keyword
loopfilter
to display information on NTP local
clock frequency.
packets Enter the keyword
packets
to display information on NTP packets.
select Enter the keyword
select
to display information on the NTP clock
selection.
sync Enter the keyword
sync
to display information on the NTP clock
synchronization.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
1560