Dell Force10 S4810P, Reference Manual

Page: 758 / 1637

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan
followed by a number
from 1 to 4094.
vrrp [[ipv6]
vrid
] (OPTIONAL) Enter the keyword
vrrp
to clear the counters of all
VRRP groups. To clear the counters of VRRP groups on all IPv6
interfaces, enter
ipv6
. To clear the counters of a specified group,
enter a VRID number from 1 to 255.
vrrp [vrf
instance
] (OPTIONAL) E-Series only: Enter the keyword
vrrp
to clear counters
for all VRRP groups. To clear the counters of VRRP groups in a
specified VRF instance, enter the name of the instance (32 characters
maximum). IPv6 VRRP groups are not supported.
learning-limit (OPTIONAL) Enter the keywords
learning-limit
to clear
unknown source address (SA) drop counters when MAC learning
limit is configured on the interface.
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF instance.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added support for 4093 VLANs on the E-Series ExaScale. Prior to the
release, 2094 was supported.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Updated the definition of the
learning-limit
option for clarity.
Example
FTOS#clear counters
Clear counters on all interfaces [confirm]
Related
Commands
mac learning-limit – allows aging of MACs even though a learning-limit is configured or
disallow station move on learnt MACs.
show interfaces – displays information on the interfaces.
758