Dell Force10 S4810P, Reference Manual

Page: 673 / 1637

•
xor4
: Use CRC16_BISYNC_AND_XOR4 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
•
xor8
: Use CRC16_BISYNC_AND_XOR8 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
•
xor16
: Use CR16 - 16 bit XOR
hg {
crc16
|
crc16cc
|
crc32MSB
|
crc32LSB
|
xor1
|
xor2
|
xor4
|
xor8
|
xor16
} stack-unit
stack-unit-
number
| port-set
port-pipe
Z-Series only: Enter the keyword
hg
followed by one of the following
options:
•
crc16
: Use CRC16_BISYNC - 16 bit CRC16-bisync polynomial
(default)
•
crc16cc
: Use CRC16_CCITT - 16 bit CRC16 using CRC16-
CCITT polynomial
•
crc32MSB
: Use CRC32_UPPER - MSB 16 bits of computed
CRC32
•
crc32LSB
: Use CRC32_LOWER - LSB 16 bits of computed
CRC32
•
xor1
: Use CRC16_BISYNC_AND_XOR1 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor1
•
xor2
: Use CRC16_BISYNC_AND_XOR2 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor2
•
xor4
: Use CRC16_BISYNC_AND_XOR4 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
•
xor8
: Use CRC16_BISYNC_AND_XOR8 - Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
•
xor16
: Use CR16 - 16 bit XOR
Enter the keywords
stack-unit
, followed by a stack-unit number,
to specify a stack-unit. The range is 0 to 7.
Enter the keywords
port-set port-pipe
followed by the port
pipe number. The range is 0 to 5.
hg-seed seed-
value stack-unit
Z-Series only: Enter the keywords
hg-seed
followed by the hash
algorithm seed value. The range is 0 to 2147483646.
Enter the keywords
stack-unit
followed by the stack unit number.
The range is 0 to 7.
Enter the keywords
port-set
followed by the line card’s port-pipe
number. The range is 0 to 5.
lag hash
algorithm value
TeraScale and ExaScale Only: Enter the keyword
lag
followed by the
LAG hash algorithm value. The range is 0 to 47.
nh-ecmp
hash
algorithm value
E-Series only: (OPTIONAL) Enter the keyword
nh-ecmp
followed by
the ECMP hash algorithm value.
linecard number E-Series only: (OPTIONAL) TeraScale and ExaScale Only: Enter the
keyword
linecard
followed by the linecard slot number. The range
is:
• 0 to 13 on an E1200/E1200i
• 0 to 6 on an E600/E600i
• 0 to 5 on an E300
673