manualshive.com logo in svg

Dell Force10 S4810P, Reference Manual

Share
Download
Dell Force10 S4810P Reference Manual Download Page 1472

Defaults

Disabled.

Command Modes

CONFIGURATION

Command History

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.4.1.0

Introduced on the E-Series.

Usage 
Information

FTOS 7.8.1.0 and later enhances the sflow implementation for real time traffic analysis on the E-
Series to provide extended gateway information in cases where the destination IP addresses 
are learned by different routing protocols and for cases where the destination is reachable 
over ECMP.

Related 
Commands

sflow extended-gateway enable

 – enables packing information on an extended gateway.

sflow extended-switch enable

 – enables packing information on a switch.

show sflow

 – displays the sFlow configuration.

sflow extended-switch enable

Enable packing information on a switch only.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

sflow extended-switch enable

To disable packing information, use the 

no sflow extended-switch [enable] 

command.

Parameters

enable

Enter the keyword 

enable

 to enable global extended information.

Defaults

Disabled.

Command Modes

CONFIGURATION

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.2.1.0

Introduced on S-Series Stacking.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.7.1.0

Introduced on the S-Series.

Version 7.6.1.0

Introduced on the C-Series.

Version 7.4.1.0

Introduced on the E-Series.

Usage 
Information

FTOS 7.8.1.0 and later enhances the sflow implementation for real time traffic analysis on the E-
Series to provide extended gateway information in cases where the destination IP addresses 

1472

Summary of Contents for Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands